Airtel Gprs Hack

FIRST METHOD You need a PC or a Laptop and the required connectivity tools ,ie., Serial/USB cable OR Infrared Device OR Bluetooth dongle 1) Activate Airtel Live! ( It’s FREE so no probs) 2) Create TWO Airtel gprs data accounts (yep TWO) and select the FIRST as the active profile. 3) Connect your mobile to the PC (or Laptop) and install the driver for your mobile’s modem. 4) Create a new dial-up connection using the NEW CONNECTION Wizard as follows:

Connecting Device : Your mobile’s modem
ISP Name : anyname (anything you like)
Phone Number : *99***3# / Try 99***1
Username and Password : blank
5) Configure your browser and download manager to use the proxy
100.1.200.99 and port 8080.( My advice is to use Opera since you
can browse both wap and regular websites)
6) Connect to the dial-up account. You will be connected at 115.2
kbps (but remember, that is a bad joke).
7) Pick up your mobile and try to access any site. You will get “Access
Denied…”(except for Airtel Live!). IT DOES NOT MATTER.
Keep the mobile down.
8 ) On the PC ( or Laptop) open your browser, enter any address ,
press ENTER and…….WAIT
9) After a few seconds the page will start to load and you have the
Whole Internet at your Disposal.

SECOND METHOD:

First Go to settings menu then to connectivity tab now choose the option Data comm. then "DATA ACCOUNTS" go to new account now the settings r as follows
ACCOUNT TYPE:GPRS
NEW ACCOUNT NAME:A1
APN:airtelfun.com
User name: (blank)
Password: (blank)

Now save it NOW! Go to Internet Setting in connectivity here choose intrnet profile--go to new profile setting are As below NAME:A1 CONNECT USING:A1(which was created in data comm.) Save It Now you would be able to see it now selest it and take "more" option then select setting here in use proxy option it will be selected no if it is no then change it into yes Now Go to Proxy address and give the adress as 100.1.200.99 and then the port number as 8080 User name: Password:

Now save all the settings You made . Come back 2 connectivity
choose streaming settings now in connect using option choose a1 that we created leave the use Proxy option as no itself